You might see an IKEA VALKRASSING throw. I see 2 meters of 150 cm wide cotton double gauze.
The throw was reduced to $20 – that’s $10 per meter. Bargain. Perfect way to tip my toe inexpensively into sewing and wearing double gauze. And what better way to do it than with Newlook 6471, the pattern I’ve just used?
After I cut out my pattern pieces I discovered it was triple gauze. I presuming that makes it even warmer to wear and a bit loftier?
The triple layers made me decide to go for a rolled collar rather than bind the neck with self bias. Two reasons – this seemed like it was going to be a cold weather top so the extra neck coverage would be welcome and sewing bias binding neatly and evenly in triple gauze onto gathers didn’t sound like fun.
The pattern doesn’t come with a rolled neck. I used the neck tie pattern pieces without the ties but with a centre back opening. To which I added button holes and buttons. This was the only place I used interfacing – a 3 cm strip underneath where the button holes and buttons were going to go.
The instructions are good for this pattern. I like the way the seam allowances for the gathered edges are 3/8 inch and that means the first line of gathering stitches is very close to the raw edge – makes it much easier to sew after it’s gathered because everything seems to stay better in place.
The cuffs weren’t interfaced. I did the same as last time – cut them wider, sewed one long edge to the gathered edge of the sleeve, folded the cuff in almost half (butted the edge up to just touch to seam allowances which were pressed towards the cuff) and then folded up again and stitched. This means my cuffs are four layers of triple gauze! No wonder they look padded!
Last time I made this I felt the sleeves were a bit short. So this version has 5 cm extra length added to the sleeves. Now a tiny bit too long. Goldilocks sleeve length is still to be attained!
I’m still liking the idea of the high low hem. So for this one I cut the hem edge on the fringed ends of the throw. In fact, given the fringes are the selvedges, all of this top was cut across rather than with the grain, apart from the bias cut collar.
What do you think? Should I cut the fringes off and hem it normally?