Eucalypt Merino wool knit dress for Felicity: BurdaStyle 11/2021 #115

In March, Felicity and I started planning what she was going to wear to a wedding at the end of April.

We ended up with a shortlist of these three Burda dress patterns:

BurdaStyle 07/2021 #119, BurdaStyle 12/2020 #103 and BurdaStyle 11/2021 #115

After shopping the stash, no appropriate fabrics were found. I know. Amazing…

Off we went to The Fabric Store, and found many lovely fabrics. And came home with one that would work with 07/2021 #119, the white dress on the left, and another that would be fine for 11/2021 #116, the mint knit dress on the right. And some other fabrics for other projects which I might get to in the next ten years. Fabric shopping is dangerous!

The plan was to make both dresses and then pick which to wear on the day depending on the weather…

The end of April is usually cool and can be rainy in Adelaide. So I hedged my bets and made the long-sleeved knit one first.

This is Burda Style 11/2021 #116 in one of The Fabric Store’s many lovely 100% merino knits.

It’s a size 40 with a 1 cm dartless FBA – made using the pivot and slide method. Lots of great resources online on how to do this- I used this one on oliver+s’ blog. I also made the sleeves full length.

I like the simple neckline on this style

I used a light weight fusible knit interfacing to give a touch more stability to the collar. First time I’ve interfaced a knit. Always something new to learn!

I also added strips of interfacing to the shoulder seams and to the insert square bit that you can’t see where the collar joins the bodice.

I’m pleased with how it turned out. Let me show you a closer view. Two reasons – the awesome label from Kylie and the Machine and my lining.

Yes I lined this dress with power mesh! I only had this off white colour – a darker colour would’ve been better because there is some shadowing of the knit facing and seam allowances. But this is much less obvious IRL, and in the photo taken below on a different day

Using power mesh was another first. I immediately purchased more (from emmaonesock – 80% nylon and 20% spandex- much superior quality to what I can purchase locally, and less expensive, even with exchange rates and shipping to Australia). Fabulous stuff! Gonna line all my knit dresses with it now!

Here’s a back view. This also shows that the skirt lining is shorter by 6 cm and all the hems are done with a double needle

Felicity says the knit lining feels gorgeous – secret pajamas if she ditches the belt..

And the other dress? Yep, made that too. And another blog post is coming soon about its story

Red and olive colour blocked dress: Style Arc Mila

Another experimental dress!

How did this happen?

Well, I had intended to add olive cuffs to my last red Bella dress but the fit issues dampened my enthusiasm.

But you know how it is – I still had the olive fabric out and there was a sizeable remnant of the red fabric left. Plus a new to me pattern to try: Style Arc’s Mila dress, which seemed perfectly suited to colour blocking.

Why not give it a try?

This is a size 16 and I like the way it fits

That V shaped bit in the centre was less tricky to do than it looks

My two fabrics were both from the stash. I’ve told you about the red before – it is a woven rayon from a local designer roll end sale in 2014. Almost vintage! It has more structure than a rayon normally has, a dry hand, and no stretch.

The olive is a polyester hi-tech microfibre from emmaonesock with great texture, drape and mechanical stretch. It was bought with a garment for Felicity in mind back in 2019 but she was less than happy with its colour so it’s languished in the stash. Despite it’s loveliness.

The Mila dress is an interesting design. The skirt has no side seams and curves from that V just under the bust to well below the waist at the back

I really like it. What I now need to do is work out how to add long sleeves to it so I can make a winter version.

Any tips?

Patrones: one out of three ain’t bad

Why Patrones? Good question. The answer is a lot to do with feeling dissatisfied with Burda itself and how I could subscribe in Australia. And liking the idea of an online magazine. And liking the concept of a smallish pdf that you then trace off your pattern from. Sounds odd?

This is what Doctor T said recently about Patrones : The downloadable PDFs are an interesting compromise; you have to both print and tile the PDF pages and trace them; but because each Patrones pattern only prints onto 9 pages it isn’t too bad to attach the PDF print-outs, and because each print-out only has 1 design, it isn’t that bad to trace either.

Seems like Patrones has it all. And you can subscribe issue by issue. So I did. For three issues.

Why have I stopped? Well you will need to read this post!

The first thing I made was this skirt. Which I totally adore.

Patrones 429 modelo 29 – Falda con pliegues (pleated skirt)

It has pockets. It has interesting drapes and folds. It has a shaped hem. It is inspired by a catwalk outfit. Of course this pattern spoke to me!

Worn here with a much loved Kalle shirt made in Liberty lawn

Wisely, I made a toile first. New pattern company and sizing, instructions in Spanish, no pictures of the pattern made up and worn by an actual person – too many unknowns!

Just as well I did because the pockets are a very different sort of construction and the goggle translation of the Spanish instructions were of very little help. It took a few adventures and quite a lot of unpicking before I worked it out.

The actual pocket is that little piece at the bottom. And no it is not attached to the facing of the drape. Ask my quick-unpick how I know. The larger piece is the yoke/side skirt
The drape is then attached to the yoke with a few stitches to hold the folds in place
Final step is to baste to the side seams
And here’s the flat lay. You can see some of my changes compared to the original draft. I curved the side seams back in by 4 cm to narrow the hem and create a balloon shape skirt and the back hem curves down rather than mirroring the front and curving up

How would have expected that the pockets and the turnback of the drape are not even connected?? Not me! I haven’t yet put something in the pockets and have it drop all the way through, but it will happen at some point!

The toile confirmed that size 48 worked for me but that I didn’t like the hem as drafted (shorter at CB and CF, longer at both sides and not pegged). So I changed that too and then made it up in a delightful midweight linen from Spotlight.

And have worn it at least once a week since.

My second attempt was not successful at all

Patrones 430 modelo 9 – Camisa Hawaiana Lloyds (Lloyds style Hawaiian shirt)

I drafted out from a size 46 (the largest size offered) to a 48 (which might be my size based on my success above). No toile this time – flat pattern measures through the bust suggested it would be fine.

Not making a toile was not a good idea – the sleeves bands on the extended shoulders were too tight, and the ease through the top was fine in terms of the fit, but not for style – this really needs to be looser to look good.

So Felicity has a new top! For the record – the sleeve bands are not loose enough on her either – pattern drafting fault I say!

I used a remnant of a lovely drapey viscose crepe – last used for a Tide dress.

But I didn’t have quite enough fabric so it got a contrast collar band in linen

Optimistic label use.

The third attempt was almost successful

Patrones 429 modelo 25 – Top cruzado (cross top)

The asymmetry drew me in.

No toile on this one (yes, I had learnt nothing..) but I did use fabric which had been languishing in my stash for a long time..

I love this cotton, polyester and metal blend fabric and I originally bought this ten years ago (yes! ten years!) in two colours – cream (this one) and light brown – like milky coffee. The coffee one got made into a skirt. But it always looks crinkled despite rigorous ironing because of the metallic content and yet its sort of fancy because of that metallic content so the creasing and the shimmer is a bit odd. I also remember that it was a bit itchy against my skin. So… almost toile fabric…

But, because it wasn’t really a toile, I used a soft linen cotton blend for the neck facing, so that the itch factor was dialed back. The linen cotton blend was harvested from a ripped pillow case – there’s a lot of back story to the fabrics in this blog post!

I traced off and made a size 48, and although it fitted okay, I thought it would be better with a bit more width through the body of the top to make it a bit boxier. So I added another strip of fabric to the side seams.

The insert is a strip the length of the top and 4 cm wide. I added 6 cm extra length at the top of the strip and tapered it to a point. This was inserted into the sleeve seam like a gusset. With all seams at 6 mm, this meant I added about 5 cm of extra width to the top below the armscyes.

And now I think its wearable.

I couldn’t work out from the line drawing or pattern or sewing instructions if the buttoned front was functional. It didn’t seem to be. The neck is crew neck style so no chance of putting this on without some sort of opening. So I added a slit and a button with a loop to the back.

The second label is “slow fashion” because this fabric spent a long time in my stash. I’m amusing myself with my labels.

Now I’ve gone back and paid more attention to the flat lay photo in the magazine it looks like there is an invisible zip at centre back. That would work too.

I could “french tuck” half of the front and make it even more asymmetric. But not the best look!

I love these buttons. They’ve been the stash a while too.

So back to the question of why I stopped my subscription

I don’t yet have the sizing sorted, but that’s not a major issue. I don’t mind the printing and tracing – 9 pages is easy. Some of the designs are delightful so its not because I don’t like enough of the styles.

I think its two things: the language barrier – I must enjoy reading about sewing more than I realised – and it being online – despite the convenience of being online, I’d much rather read from an actual magazine.

Any one else tried this new format of Patrones recently? What did you think?